Novel likely pathogenic variant in the EYA1 gene causing Branchio oto renal syndrome and the exploration of pathogenic mechanisms.

OBJECTIVE: Branchio-oto-renal syndrome (BOR, OMIM#113,650) is a rare autosomal dominant disorder that presents with a variety of symptoms, including hearing loss (sensorineural, conductive, or mixed), structural abnormalities affecting the outer, middle, and inner ear, branchial fistulas or cysts, as well as renal abnormalities.This study aims to identify the pathogenic variants by performing genetic testing on a family with Branchio-oto-renal /Branchio-otic (BO, OMIM#602,588) syndrome using whole-exome sequencing, and to explore possible pathogenic mechanisms. METHODS: The family spans 4 generations and consists of 9 individuals, including 4 affected by the BOR/BO syndrome. Phenotypic information, including ear malformation and branchial cleft, was collected from family members. Audiological, temporal bone imaging, and renal ultrasound examinations were also performed. Whole-exome sequencing was conducted to identify candidate pathogenic variants and explore the underlying molecular etiology of BOR/BO syndrome by minigene experiments. RESULTS: Intra-familial variability was observed in the clinical phenotypes of BOR/BO syndrome in this family. The severity and nature of hearing loss varied in family members, with mixed or sensorineural hearing loss. The proband, in particular, had profound sensorineural hearing loss on the left and moderate conductive hearing loss on the right. Additionally, the proband exhibited developmental delay, and her mother experienced renal failure during pregnancy and terminated the pregnancy prematurely. Genetic testing revealed a novel heterozygous variant NM_000503.6: c.639 + 3 A > C in the EYA1 gene in affected family members. In vitro minigene experiments demonstrated its effect on splicing. According to the American College of Medical Genetics (ACMG) guidelines, this variant was classified as likely pathogenic. CONCLUSION: This study highlights the phenotypic heterogeneity within the same family, reports the occurrence of renal failure and adverse pregnancy outcomes in a female patient at reproductive age with BOR syndrome, and enriches the mutational spectrum of pathogenic variants in the EYA1 gene.

Influences of Ru and ZrO2 interaction on the hydroesterification of styrene.

Interfacial Lewis acid-base pairs are commonly found in ZrO2-supported metal catalysts due to the facile generation of oxygen vacancies of ZrO2. These pairs have been reported to play a crucial role in olefin hydroesterification, especially in the absence of acid promoters and ligands. In this study, a series of ZrO2-supported Ru catalysts with ruthenium(iii) chloride and ruthenium(iii) acetylacetonate as precursors were prepared for the styrene hydroesterification. The catalysts were thoroughly characterized by TPR, TEM, EPR, XPS, and FTIR. The Ru precursors significantly influenced the size and electronic properties of Ru clusters, albeit having minimal impact on oxygen vacancies. Mechanistic studies of styrene hydroesterification over ZrO2-supported Ru catalysts revealed that the carbon monoxide insertion followed the hydrogen transfer step to activated styrene. Higher activity is exhibited over ZrO2-supported Ru catalysts prepared with ruthenium(iii) chloride as a precursor, attributed to the lower adsorption strength of CO over Ru clusters, as evidenced by FTIR and DFT calculations.

Dual-site segmentally synergistic catalysis mechanism: boosting CoFeSx nanocluster for sustainable water oxidation.

Efficient oxygen evolution reaction electrocatalysts are essential for sustainable clean energy conversion. However, catalytic materials followed the conventional adsorbate evolution mechanism (AEM) with the inherent scaling relationship between key oxygen intermediates *OOH and *OH, or the lattice-oxygen-mediated mechanism (LOM) with the possible lattice oxygen migration and structural reconstruction, which are not favorable to the balance between high activity and stability. Herein, we propose an unconventional Co-Fe dual-site segmentally synergistic mechanism (DSSM) for single-domain ferromagnetic catalyst CoFeSx nanoclusters on carbon nanotubes (CNT) (CFS-ACs/CNT), which can effectively break the scaling relationship without sacrificing stability. Co3+ (L.S, t2g6eg0) supplies the strongest OH* adsorption energy, while Fe3+ (M.S, t2g4eg1) exposes strong O* adsorption. These dual-sites synergistically produce of Co-O-O-Fe intermediates, thereby accelerating the release of triplet-state oxygen ( ↑ O = O ↑ ). As predicted, the prepared CFS-ACs/CNT catalyst exhibits less overpotential than that of commercial IrO2, as well as approximately 633 h of stability without significant potential loss.

Independent and combined effects of microplastics pollution and drought on soil bacterial community.

Global terrestrial ecosystems are simultaneously threatened by multiple environmental pressures, with microplastics (MPs) pollution and drought possibly being the most pressing, both of which may have unanticipated effects on soil organisms. Here, we investigated the responses of diversity, composition and functions of soil bacterial community to MPs pollution (including two MPs types: polyethylene (PE) and polylactic acid (PLA); two MPs sizes: < 20 µm and <300 µm) and drought in microcosms. We found that only 20 µm PLA MPs significantly decreased soil bacterial diversity by 17.4 % and altered soil bacterial community composition, while PE MPs and 300 µm PLA MPs had no significant effects. The copiotrophic bacteria (i.e., Proteobacteria and Firmicutes) were enriched in the 20 µm PLA MPs pollution soils due to the enhanced dissolved organic carbon contents. Moreover, our results showed that the 20 µm PLA MPs also affected the potential phenotypes and functions of soil bacterial community, increasing the potentially pathogenic, stress-tolerant, containing mobile elements and forming biofilms phenotypes, and promoting membrane transport and signal transduction pathways. These results suggested that the effects of MPs on soil bacterial community varied depending on MPs types and sizes. However, drought significantly increased soil bacterial diversity by 10.3 % and affected soil bacterial community composition in the 20 µm PLA MPs pollution soils. We also found that drought inhibited the levels of potentially pathogenic, containing mobile elements and forming biofilms phenotypes in the 20 µm PLA MPs pollution soils. Taken together, these findings reveal that drought may alleviate the adverse effects of MPs pollution on soil bacterial community, which enhances our understanding of the interactive effects of multiple global change factors on agroecosystem functions.

Precise Molecular Engineering of Type I Photosensitizer with Aggregation-Induced Emission for Image-Guided Photodynamic Eradication of Biofilm.

Biofilm-associated infections exert more severe and harmful attacks on human health since they can accelerate the generation and development of the antibiotic resistance of the embedded bacteria. Anti-biofilm materials and techniques that can eliminate biofilms effectively are in urgent demand. Therefore, we designed a type I photosensitizer (TTTDM) with an aggregation-induced emission (AIE) property and used F-127 to encapsulate the TTTDM into nanoparticles (F-127 AIE NPs). The NPs exhibit highly efficient ROS generation by enhancing intramolecular D-A interaction and confining molecular non-radiative transitions. Furthermore, the NPs can sufficiently penetrate the biofilm matrix and then detect and eliminate mature bacterial biofilms upon white light irradiation. This strategy holds great promise for the rapid detection and eradication of bacterial biofilms.

Drought Alleviates the Negative Effects of Microplastics on Soil Micro-Food Web Complexity and Stability.

Soil ecosystems are under considerable pressure due to anthropogenic factors, including microplastics (MPs) pollution and drought. However, little is known about the interactive effects of MPs and drought on soil organisms, especially soil micro-food web. We conducted a microcosm experiment with MPs pollution (including two types and two sizes of MPs) and drought to investigate their interaction effects on soil microbial, protist, and nematode communities in soil micro-food web. We found that MPs significantly decreased the complexity and stability of soil micro-food web, with greater negative effects of biodegradable and smaller-sized MPs than conventional and larger-sized MPs. Drought had negative effects on soil micro-food web in the non-MPs pollution soils while increasing the complexity and stability of soil micro-food web in the MPs pollution soils. Drought increased the proportion of negative correlations between bacteria and fungi in the biodegradable MPs soils while decreasing the proportion of negative correlations between protists and nematodes in the smaller-sized MPs soils. Our study reveals that drought may alleviate the negative effects of MPs on soil micro-food web by reducing competition among lower trophic levels in the biodegradable MPs pollution soils while reducing competition among higher trophic levels in the smaller-sized MPs pollution soils.

Molecular Mechanisms and Clinical Phenotypes of GJB2 Missense Variants.

The GJB2 gene is the most common gene responsible for hearing loss (HL) worldwide, and missense variants are the most abundant type. GJB2 pathogenic missense variants cause nonsyndromic HL (autosomal recessive and dominant) and syndromic HL combined with skin diseases. However, the mechanism by which these different missense variants cause the different phenotypes is unknown. Over 2/3 of the GJB2 missense variants have yet to be functionally studied and are currently classified as variants of uncertain significance (VUS). Based on these functionally determined missense variants, we reviewed the clinical phenotypes and investigated the molecular mechanisms that affected hemichannel and gap junction functions, including connexin biosynthesis, trafficking, oligomerization into connexons, permeability, and interactions between other coexpressed connexins. We predict that all possible GJB2 missense variants will be described in the future by deep mutational scanning technology and optimizing computational models. Therefore, the mechanisms by which different missense variants cause different phenotypes will be fully elucidated.

Camouflaged Virus-Like-Nanocarrier with a Transformable Rough Surface for Boosting Drug Delivery.

Due to non-specific strong nano-bio interactions, it is difficult for nanocarriers with permanent rough surface to cross multiple biological barriers to realize efficient drug delivery. Herein, a camouflaged virus-like-nanocarrier with a transformable rough surface is reported, which is composed by an interior virus-like mesoporous SiO2 nanoparticle with a rough surface (vSiO2 ) and an exterior acid-responsive polymer. Under normal physiological pH condition, the spikes on vSiO2 are hidden by the polymer shell, and the non-specific strong nano-bio interactions are effectively inhibited. While in the acidic tumor microenvironment, the nanocarrier sheds the polymer camouflage to re-expose its rough surface. So, the retention ability and endocytosis efficiency of the nanocarrier are great improved. Owing to it's the dynamically variable rough surface, the rationally designed nanocarrier exhibits extended blood-circulation-time and enhanced tumor accumulation.

Machine learning method for predicting cadmium concentrations in rice near an active copper smelter based on chemical mass balance.

Identification the sources of heavy metals can effectively control and prevent agricultural soil pollution. Here we performed a three-year mass balance study along a gradient of soil pollution near a smelter to quantify the potential contribution and net cadmium (Cd) fluxes and predict Cd concentration in rice grains by multiple regression (MR) and back propagation (BP) neural network. The Cd inputs were mainly from the irrigation water (54.6-60.8%) in the moderately polluted and background sites but from atmospheric deposition (90.9%) in the highly polluted site. The Cd outputs were mainly from the surface runoff (55.8-59.5%) in the moderately polluted and background sites, but from Sedum plumbizincicola phytoextraction (83.6%) in the highly polluted site. The soil Cd concentrations, the annual fluxes of atmospheric deposition, pesticides and fertilizers, irrigation water, surface runoff, and leaching water were selected as the dependent factors to predict Cd concentrations in rice grains. The genetic algorithms (GA)-BP neural network model gives the best prediction accuracy compared to the BP neural network model and multivariate regression analysis. The major implication is that the health risks through the consumption of rice can be rapidly assessed based on the Cd concentrations in rice grains predicted by the model.

The association of pulse pressure change with memory decline in middle-aged and older adults.

BACKGROUND: Less is known regarding the association of pulse pressure (PP) with memory function. This study aimed to characterize long-term patterns of PP in middle-aged and older adults and explore their impact on subsequent change in memory function. METHODS: Data from the English Longitudinal Study of Ageing (ELSA, 2004-2018), were analyzed. Totally, 3587 dementia-free participants with three measurements of BP were included. All three visits of PP (2004-2012) were used to characterize longitudinal patterns of PP by group-based trajectory modeling (GBTM). Generalized estimating equation (GEE) models were fitted to explore the impact of PP trajectories on change in memory over a subsequent 6-year period (2012-2018). RESULTS: Using GBTM, three distinct trajectories of PP were identified: low-stable (38.1%), moderate-stable (48.6%), and elevated-increasing group (13.3%). GEE model suggested that memory declined over a 6-year period in all PP trajectories (all Ptime <0.001). The overall interactions between patterns of PP changes and time with memory were statistically significant (χ2 interaction  = 20.69, p = 0.002). Compared to participants in the low-stable group, those in the moderate-stable and elevated-increasing group exhibited a faster decline in memory. CONCLUSIONS: Longitudinal patterns of moderate-stable and elevated-increasing PP were associated with an accelerated decrease in memory. Controlling BP instability may be a promising interventional strategy for preventing cognitive decline among older adults.

Cloning, Expression, and Functional Analysis of the Full-Length cDNA of Acetyl-CoA C-acetyltransferase (AACT) Genes Related to Terpenoid Synthesis in Platycodon grandiflorus.

Platycodon grandiflorus is a well-known and widely distributed traditional herbal medicine and functional food in Asia, with triterpenoids as the main bioactive component in its roots. Acetyl-CoA C-acetyltransferase (AACT) is the initiation enzyme in the mevalonate pathway and plays an important role in the biosynthesis of terpenoids. OBJECTIVE: The objective of this study was to clone and identify the PgAACT function in P. grandiflorus. METHODS: The full-length sequence of PgAACT genes was isolated and cloned from P. grandiflorus by polymerase chain reaction (PCR). The recombinant plasmid was constructed using the pET-32a vector and expressed in E. coli Transetta (DE3) cells. Subcellular localization of AACT was observed in the epidermal cells of N. tabacum. Quantitative reverse transcription-PCR (qRT-PCR) was used to identify the PgAACT gene transcription levels. After MeJA treatment, the changes in AACT gene expression were observed, and UHPLC-Q-Exactive Orbitrap MS/MS was used to detect the changes in P. grandiflorus saponins. RESULTS: In this study, two full-length cDNAs encoding AACT1 (PgAACT1) and AACT2 (PgAACT2) were isolated and cloned from P. grandiflorus. The deduced PgAACT1 and PgAACT2 proteins contain 408 and 416 amino acids, respectively. The recombinant vectors were constructed, and the protein expression was improved by optimizing the reaction conditions. Sodium dodecyl sulphate-polycrylamide gel electrophloresis and western blot analysis showed that the PgAACT genes were successfully expressed, with molecular weights of the recombinant proteins of 61 and 63 kDa, respectively. Subcellular localization showed that the PgAACT genes were localized in the cytoplasm. Tissue specificity analysis of P. grandiflorus from different habitats showed that PgAACT genes were expressed in the roots, stems, and leaves. After MeJA treatment, the expression level of PgAACT genes and the content of total saponins of P. grandiflorus were significantly increased, suggesting that PgAACT genes play an important role in regulating plant defense systems. CONCLUSION: Cloning, expression, and functional analysis of PgAACT1 and PgAACT2 will be helpful in understanding the role of these two genes in terpene biosynthesis.

A general method for rapid synthesis of refractory carbides by low-pressure carbothermal shock reduction.

Refractory carbides are attractive candidates for support materials in heterogeneous catalysis because of their high thermal, chemical, and mechanical stability. However, the industrial applications of refractory carbides, especially silicon carbide (SiC), are greatly hampered by their low surface area and harsh synthetic conditions, typically have a very limited surface area (<200 m2 g-1), and are prepared in a high-temperature environment (>1,400 °C) that lasts for several or even tens of hours. Based on Le Chatelier's principle, we theoretically proposed and experimentally verified that a low-pressure carbothermal reduction (CR) strategy was capable of synthesizing high-surface area SiC (569.9 m2 g-1) at a lower temperature and a faster rate (∼1,300 °C, 50 Pa, 30 s). Such high-surface area SiC possesses excellent thermal stability and antioxidant capacity since it maintained stability under a water-saturated airflow at 650 °C for 100 h. Furthermore, we demonstrated the feasibility of our strategy for scale-up production of high-surface area SiC (460.6 m2 g-1), with a yield larger than 12 g in one experiment, by virtue of an industrial viable vacuum sintering furnace. Importantly, our strategy is  also applicable to the rapid synthesis of refractory metal carbides (NbC, Mo2C, TaC, WC) and even their emerging high-entropy carbides (VNbMoTaWC5, TiVNbTaWC5). Therefore, our low-pressure CR method provides an alternative strategy, not merely limited to temperature and time items, to regulate the synthesis and facilitate the upcoming industrial applications of carbide-based advanced functional materials.

Prevalence and pathology of Cephalopina titillator infestation in Camelus bactrianus from Xinjiang, China.

BACKGROUND: In camels, nasopharyngeal myiasis is caused by the larvae of Cephalopina titillator, which parasitize the tissues of nasal and paranasal sinuses, pharynx, and larynx. C. titillator infestation adversely affects the health of camels and decreases milk and meat production and even death. However, the C. titillator infestation in Bactrian camels has not been widely studied. METHODS: The present study was conducted to determine the prevalence and risk factors of C. titillator in Bactrian camels of northwestern Xinjiang. Suspected larvae recovered from infested camels were evaluated for C. titillator by microscopy and polymerase chain reaction. Nucleotide sequences of the partial mitochondrial cytochrome c oxidase subunit I (COX1) and cytochrome b (CYTB) genes from the C. titillator of camels were aligned from the NCBI database. Furthermore, the gross and histopathological alterations associated with C. titillator infestation were evaluated via pathological examination. RESULTS: Of 1263 camels examined 685 (54.2%) camels were infested with suspected C. titillator larvae. Different larval stages were topically detected in the nasal passages and pharynx of the camel heads. Microscopy analysis of the pharyngeal mucosa tissue revealed necrotic tissue debris and some inflammatory cells. Molecular detection of the larval COX1 and CYTB genes indicated that pathogen collected in Bactrian camels was C. titillator. The epidemiological study demonstrated that the prevalence rate of C.titillator infestation was significantly higher in camels of Bestierek Town Pasture (67.2%) and Karamagai Town Pasture (63.6%) compared to Kitagel Town Pasture (38.7%) and Qibal Town Pasture (35.8%) (P < 0.05). No significant difference was observed between the prevalence rates in male (52.6%) and female (54.6%) camels (P > 0.05). The prevalence was higher in warm (64.2%) than that in cold (48.4%) seasons (P < 0.001). The prevalence in camels with non-nomadic method (67.2%) was significantly higher than in animals with nomadic method (47.5%) (P < 0.001). The prevalence of C.titillator infestation was significantly higher in animals of aged 5-10 (60.1%) and aged > 10 (61.1%) years old compared to those of aged < 5 (31.7%) years old camels (P < 0.001). CONCLUSION: Our results confirm that there is a high prevalence of C. titillator in Bactrian camels from Xinjiang, closely related to age, season, pasture environment, and husbandry methods. Developing prevention, diagnosis, and control programs to prevent transmission is necessary.

Efficient electrochemical degradation of X-GN dye wastewater using porous boron-doped diamond electrode.

Surface porous Ti substrates were obtained by electrodeposition-hot melt-alkali etching. Porous-Ti/BDD and flat-Ti/BDD electrodes were prepared for comparative study. The results of SEM, Raman, and XRD analyses show that the BDD films of these two electrodes had good uniformity and stable quality. The electrochemical window (EW) and electrochemical-active surface area (EASA) of the porous-Ti/BDD electrode is as high as 4.21 V and 22.78 cm2 (11.39 cm2/cm2), respectively. Furthermore, the electrochemical catalytic performance and degradation mechanism of porous-Ti/BDD electrode as the anode were studied by the electrolysis of Active Orange dye X-GN (X-GN), and the optimal electrochemical degradation operating parameters were obtained. The results show that when the degradation time was 50 min, the X-GN was completely decolorized. The TOC removal rate reached 69.24%, and the energy consumption was 5.62 kWh m-3. The contribution rate of •OH and SO4•- was calculated to be 91.40% and 1.26% by radical quenching experiments, respectively, indicating that the active substances in the degradation system were mainly •OH and SO4•-. The high specific surface characteristics of porous-Ti/BDD electrode enhanced its electrochemical oxidation advantages, and it showed a high degradation efficiency and low energy consumption for the treatment of X-GN simulated wastewater.

Transcriptome-wide identification of WRKY transcription factors and their expression profiles in response to methyl jasmonate in Platycodon grandiflorus.

Platycodon grandiflorus, a perennial flowering plant widely distributed in China and South Korea, is an excellent resource for both food and medicine. The main active compounds of P. grandiflorus are triterpenoid saponins. WRKY transcription factors (TFs) are among the largest gene families in plants and play an important role in regulating plant terpenoid accumulation, physiological metabolism, and stress response. Numerous studies have been reported on other medicinal plants; however, little is known about WRKY genes in P. grandiflorus. In this study, 27 PgWRKYs were identified in the P. grandiflorus transcriptome. Phylogenetic analysis showed that PgWRKY genes were clustered into three main groups and five subgroups. Transcriptome analysis showed that the PgWRKY gene expression patterns in different tissues differed between those in Tongcheng City (Southern Anhui) and Taihe County (Northern Anhui). Gene expression analysis based on RNA sequencing and qRT-PCR analysis showed that most PgWRKY genes were expressed after induction with methyl jasmonate (MeJA). Co-expressing PgWRKY genes with triterpenoid biosynthesis pathway genes revealed four PgWRKY genes that may have functions in triterpenoid biosynthesis. Additionally, functional annotation and protein-protein interaction analysis of PgWRKY proteins were performed to predict their roles in potential regulatory networks. Thus, we systematically analyzed the structure, evolution, and expression patterns of PgWRKY genes to provide an important theoretical basis for further exploring the molecular basis and regulatory mechanism of WRKY TFs in triterpenoid biosynthesis.

Constructing Unique Mesoporous Carbon Superstructures via Monomicelle Interface Confined Assembly.

Constructing hierarchical three-dimensional (3D) mesostructures with unique pore structure, controllable morphology, highly accessible surface area, and appealing functionality remains a great challenge in materials science. Here, we report a monomicelle interface confined assembly approach to fabricate an unprecedented type of 3D mesoporous N-doped carbon superstructure for the first time. In this hierarchical structure, a large hollow locates in the center (∼300 nm in diameter), and an ultrathin monolayer of spherical mesopores (∼22 nm) uniformly distributes on the hollow shells. Meanwhile, a small hole (4.0-4.5 nm) is also created on the interior surface of each small spherical mesopore, enabling the superstructure to be totally interconnected. Vitally, such interconnected porous supraparticles exhibit ultrahigh accessible surface area (685 m2 g-1) and good underwater aerophilicity due to the abundant spherical mesopores. Additionally, the number (70-150) of spherical mesopores, particle size (22 and 42 nm), and shell thickness (4.0-26 nm) of the supraparticles can all be accurately manipulated. Besides this spherical morphology, other configurations involving 3D hollow nanovesicles and 2D nanosheets were also obtained. Finally, we manifest the mesoporous carbon superstructure as an advanced electrocatalytic material with a half-wave potential of 0.82 V (vs RHE), equivalent to the value of the commercial Pt/C electrode, and notable durability for oxygen reduction reaction (ORR).

Spatio-temporal evolution and driving factors of carbon storage in the Western Sichuan Plateau.

The carbon sequestration function of the ecosystem is one of the most important functions of ecosystem service, and it of great significance to study the spatio-temporal differentiation of carbon storage for promoting regional sustainable development. Ecosystems on the Western Sichuan Plateau are highly variable, but its spatio-temporal differentiation and driving factors are not yet clear. In this study, on the basis of land use monitoring data, meteorological and demographic data interpreted from Landsat remote sensing image, and through GIS analysis tools, the carbon storage module of InVEST (Integrated Valuation of Ecosystem Services and Trade-offs) model was used to estimate carbon storage and geodetector was used to detect the driving factors of carbon storage spatial differentiation. The results show that: (1) The carbon storage increased to 1.2455 × 1010 t from 1.2438 × 1010 t in the past 20 years, the ecosystem developed in a healthy way overall. (2) Carbon storage show High-High and Low-Low aggregation characteristics, but the area decreased by 1481.81 km2 and 311.11 km2 respectively, and the spatial cluster effect gradually weakened. (3) HAI is the leading factor causing the spatio-temporal differentiation of regional carbon storage, followed by temperature and NDVI; the interaction between factors significantly enhances the spatial differentiation of carbon storage, indicating that the change of carbon storage is the result of the joint action of natural and socioeconomic factors. The results of the study provide some theoretical basis for the development of differentiated ecological regulation models and strategies, and help to promote high-quality regional development.

Modular super-assembly of hierarchical superstructures from monomicelle building blocks.

Manipulating the super-assembly of polymeric building blocks still remains a great challenge due to their thermodynamic instability. Here, we report on a type of three-dimensional hierarchical core-satellite SiO2@monomicelle spherical superstructures via a previously unexplored monomicelle interfacial super-assembly route. Notably, in this superstructure, an ultrathin single layer of monomicelle subunits (~18 nm) appears in a typically hexagon-like regular discontinuous distribution (adjacent micelle distance of ~30 nm) on solid spherical interfaces (SiO2), which is difficult to achieve by conventional super-assembled methods. Besides, the number of the monomicelles on colloidal SiO2 interfaces can be quantitatively controlled (from 76 to 180). This quantitative control can be precisely manipulated by tuning the interparticle electrostatic interactions (the intermicellar electrostatic repulsion and electrostatic attractions between the monomicelle units and the SiO2 substrate). This monomicelle interfacial super-assembly strategy will enable a controllable way for building multiscale hierarchical regular micro- and/or macroscale materials and devices.

Enzyme-Based Mesoporous Nanomotors with Near-Infrared Optical Brakes.

As one of the most important parameters of the nanomotors' motion, precise speed control of enzyme-based nanomotors is highly desirable in many bioapplications. However, owing to the stable physiological environment, it is still very difficult to in situ manipulate the motion of the enzyme-based nanomotors. Herein, inspired by the brakes on vehicles, the near-infrared (NIR) "optical brakes" are introduced in the glucose-driven enzyme-based mesoporous nanomotors to realize remote speed regulation for the first time. The novel nanomotors are rationally designed and fabricated based on the Janus mesoporous nanostructure, which consists of the SiO2@Au core@shell nanospheres and the enzymes-modified periodic mesoporous organosilicas (PMOs). The nanomotor can be driven by the biofuel of glucose under the catalysis of enzymes (glucose oxidase/catalase) on the PMO domain. Meanwhile, the Au nanoshell at the SiO2@Au domain enables the generation of the local thermal gradient under the NIR light irradiation, driving the nanomotor by thermophoresis. Taking advantage of the unique Janus nanostructure, the directions of the driving force induced by enzyme catalysis and the thermophoretic force induced by NIR photothermal effect are opposite. Therefore, with the NIR optical speed regulators, the glucose-driven nanomotors can achieve remote speed manipulation from 3.46 to 6.49 µm/s (9.9-18.5 body-length/s) at the fixed glucose concentration, even after covering with a biological tissue. As a proof of concept, the cellar uptake of the such mesoporous nanomotors can be remotely regulated (57.5-109 µg/mg), which offers great potential for designing smart active drug delivery systems based on the mesoporous frameworks of this novel nanomotor.

Concave Pt-Zn Nanocubes with High-Index Faceted Pt Skin as Highly Efficient Oxygen Reduction Catalyst.

High dosage of expensive Pt to catalyze the sluggish oxygen reduction reaction (ORR) on the cathode severely impedes the commercialization of proton exchange membrane fuel cells. Therefore, it is urgent to cut down the Pt catalyst by efficiently improving the ORR activity while maintaining high durability. Herein, magic concave Pt-Zn nanocubes with high-index faceted Pt skin (Pt78 Zn22 ) are proposed for high-efficiency catalysis toward proton exchange membrane fuel cells. These unique structural features endow the Pt-skin Pt78 Zn22 /KB with a mass activity of 1.18 mA µgPt -1 and a specific activity of 3.64 mA cm-2 for the ORR at 0.9 V (vs RHE). Meanwhile, the H2 -O2 fuel cell assembled by this catalyst delivers an ultrahigh peak power density of ≈1449 mW cm-2 . Both experiments and theoretical calculations show that the electronic structure of the surface is adjusted, thereby shortening the length of the Pt-Pt bond and reducing the adsorption energy of OH*/O* on the Pt surface. This work demonstrates the synergistic effect of the oxidation-resistant metal Zn and the construction of Pt-rich surface engineering. Also, it guides the future development of catalysts for their practical applications in energy conversion technologies and beyond.